Ignore:
Timestamp:
07/06/20 23:36:46 (4 years ago)
Author:
Maciej Komosinski
Message:

Renamed three "solid-compatible" receptors to have more informative names

File:
1 edited

Legend:

Unmodified
Added
Removed
  • cpp/frams/config/f0-SDK.def

    r975 r976  
    147147ENDNEUROCLASS
    148148
    149 NEUROCLASS(GyroP,Gp,Part Gyroscope,`Tilt sensor. Signal is directly proportional to the tilt angle.\n0=the part X axis is horizontal\n+1/-1=the axis is vertical',0,1,1)
     149NEUROCLASS(GyroP,Gpart,Part Gyroscope,`Tilt sensor. Signal is directly proportional to the tilt angle.\n0=the part X axis is horizontal\n+1/-1=the axis is vertical',0,1,1)
    150150VISUALHINTS(ReceptorClass)
    151151SYMBOL(`8,7,100,50,90,50,90,40,70,40,80,50,70,60,90,60,90,50,12,43,24,48,24,48,19,38,19,38,24,43,24,43,54,48,54,48,64,43,69,38,64,38,54,43,54,5,63,69,58,74,48,79,38,79,28,74,23,69,1,43,79,43,74,1,23,69,26,66,1,63,69,60,66,1,55,76,53,73,1,31,75,33,72')
     
    162162ENDNEUROCLASS
    163163
    164 NEUROCLASS(TouchC,Tc,Touch contact,`Touch sensor.\n-1=no contact\n0=the Part is touching the obstacle\n>0=pressing, value depends on the force applied (not implemented in ODE mode)',0,1,1)
     164NEUROCLASS(TouchC,Tcontact,Touch contact,`Touch sensor.\n-1=no contact\n0=the Part is touching the obstacle\n>0=pressing, value depends on the force applied (not implemented in ODE mode)',0,1,1)
    165165VISUALHINTS(ReceptorClass)
    166166SYMBOL(`2,7,100,50,90,50,90,40,70,40,80,50,70,60,90,60,90,50,11,75,50,65,50,60,55,55,45,50,55,45,45,40,50,35,50,30,45,25,50,30,55,35,50')
    167167ENDNEUROCLASS
    168168
    169 NEUROCLASS(TouchP,Tp,Touch proximity,`Proximity sensor detecting obstacles along the X axis.\n-1=distance is \'r\' or more\n0=zero distance',0,1,1)
     169NEUROCLASS(TouchP,Tproximity,Touch proximity,`Proximity sensor detecting obstacles along the X axis.\n-1=distance is \'r\' or more\n0=zero distance',0,1,1)
    170170VISUALHINTS(ReceptorClass)
    171171SYMBOL(`2,7,100,50,90,50,90,40,70,40,80,50,70,60,90,60,90,50,11,75,50,65,50,60,55,55,45,50,55,45,45,40,50,35,50,30,45,25,50,30,55,35,50')
Note: See TracChangeset for help on using the changeset viewer.